Beschreibung
Disperser with electronic speed variation diamac d 50
Disperser with electronic speed variation diamac d 50
Like new, never used, including auger for pouring powders and raw materials.
The machine is sold including the auger (price agreements will be negotiated during the negotiation phase)
CONSTRUCTION FEATURES
Supporting metal structure
Locking system
adjustable bowl with tightening straps
Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure
Lifting piston with non-return valves and flow regulator
AISI 304-316 stainless steel mixing shaft
V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed
Main electrical panel with driving inverter including filter and anti-interference inductance
Normal or ATEX type machine side control pulpit. Industrial or ATEX type motor drives with thermistors
Safety systems and CE mark
OPERATIONAL FEATURES
All the electrical operating controls of the machine and the signals are positioned on the control pulpit of the Disperser.
On the other hand, the hydraulic distributor for lifting is positioned on the machine body to be operated simultaneously with the RUN button of the motor of the hydraulic unit, positioned on the control pulpit. The potentiometer is also installed on the pulpit to allow the continuous variation of the speed of the mixing axis, the digital rev counter to display the number of revs set, the "ON - STOP and RESET" buttons to control the inverter.
The following utilities are positioned on the main electrical panel containing the inverter: Main switch which allows the activation of the machine Thermal trip signals, mains voltage presence, thermistor intervention Emergency button
USE AND MAINTENANCE
Low energy consumption in relation to the power actually supplied by the inverter by turning the potentiometer
Low noise
Easily accessible and simple to use controls Easy insertion and removal of processing tanks with different diameters Main visible components, with access to the pulleys and belts area by removing the upper cover of the head made of sheet metal. Easy access to the control unit area by removing the rear panel of the machine Internal column lubrication greaser located on the external bearing column ALTERNATIVE VERSIONS "BELLOWS" type safety system, as an alternative to the dust-tight cover, including rod supports, guide rods side slides, protective bellows of the mixing axis and safety limit switch for lid insertion in the lightened version, of the removable type. Flat or convex vacuum-tight lid in stainless steel. stainless steel Aisi 304 or acc. in carbon, predisposed for vacuum pump connections, complete with connections for loading liquids and inspection porthole.
Lid of the "glissante" type made according to the diameter required by the user, which allows the head of the machine to be lifted, during the working cycle, up to an agreed height, remaining placed on the processing tank. Automatic lifting management, during the working cycle, via PLC, (programmable logic controller) installed inside the main electrical panel containing the inverter, which allows the machine to have a continuous, adjustable, timed vertical fluctuation, made according to the different needs of the user. Motorization of the 2, 4, 6 and 8 pole type with adjustment of the reduction ratio Motorization of the power-ventilated type for continuous cooling Pneumatic piston, with dedicated control, for tightening the bowl to the blocking present in the "standard" version
Rotating scraper with double or single blade to be combined with the type of cover chosen (stainless steel or carbon steel) Impellers of the Lenard type, with propeller, Cowless with inclined blades, with anchor
Bitte beachten Sie, dass diese Beschreibung automatich übersetzt wurde. Für weitere Informationen stehen wir Ihnen gerne zur Verfügung. Die Angaben in dieser Anzeige sind unverbindlich. Wir empfehlen, die Details vor einem Kauf mit dem Verkäufer zu überprüfen.