Kitako MT4-200

Machine MFG Kitako Machine Model Kitako MT4-200 Sub Type 1 Lathe - CNC Sub Type 2 Chucker Specifications Kitako MT4-200 (Installed 1998) Swing: 7.9" Mach. Diam.: 6.30" Chuck: AHD Collet Chucks (4) HP: 20 x 2 Spindle Speed: 4,000 X-Axis Travel: 6.69" Z Axis Travel: 9.84" Number of Axes: 4 Turret Tool: (2) V8 Station Turrets Voltage: 220/480 Spindle Nose: A2-6 Equipped with Fanuc 16 TTA control 4 8" CHUCKs General : There are two MD-4 200 machines in a cell being loaded / unloaded by a gantry type robot – robot is not included. The general appearance of the machines is good. The machines are dirty but all guards are in place and none were bent or damaged. One machine was operational the other had a bad control board that has since been replaced and the machine is now operational . I opened the front covers and ran the one machine thru some part program cycles. The spindles ramped up to speed smoothly, they ran thru the cycle speeding up, slowing down and breaking without any signs of vibration or noise - The slides ran smoothly with no vibration. - The carrier index was smooth, quiet and no vibration. …

Machine MFG Kitako Machine Model Kitako MT4-200 Sub Type 1 Lathe - CNC Sub Type 2 Chucker Specifications 1997 KITAKO MT4-200 Twin Spindle Chuck Size 8" (4) Max Swing Over Bed / Carriage 7.9" Max Turning Diameter 7.8" Max Machining Length 4" Tools 8 (2) Spindle Speed 30 - 4000 RPM Spindle Bore 1.97" Spindle Nose A2-6 Spindle Motor 20 HP (2) Rapid Traverse Rates (X / Z) 394 / 551 IPM X-Axis Travel (Left & Right Turret) 6.69" Z-Axis Travel (Left & Right Turret) 9.84" Machine Dimensions (L x W x H) 132" x 79" x 86" Machine Weight 16,535 lbs. FEATURES: FANUC 18T CNC CONTROL Four Spindles (Two for Machining & Two for Loading) 9" Monochrome CRT (4) 8" Hydraulic Chucks (2) 8 Position Turrets Chip Conveyor

Machine MFG Kitako Machine Model Kitako MT4-200 Sub Type 1 Lathe - CNC Sub Type 2 Chucker Specifications Kitako MT4-200 (Installed 1998) Swing: 7.9" Mach. Diam.: 6.30" Chuck: AHD Collet Chucks (4) HP: 20 x 2 Spindle Speed: 4,000 X-Axis Travel: 6.69" Z Axis Travel: 9.84" Number of Axes: 4 Turret Tool: (2) V8 Station Turrets Voltage: 220/480 Spindle Nose: A2-6 Equipped with Fanuc 16 TTA control 4 8" CHUCKs Four machines one location